Users Guide

show buffer-profile stack-unit
Display the buffer profile that is applied to a stack-unit.
S5000
Syntax
show buffer-profile stack—unit unit-number
Parameters
stack-unit unit-
number
Enter the keyword stack-unit followed by the unit number. The range is 0 to 11.
If you do not type a unit number, Dell Networking OS displays buffer-profiles for all
units.
Defaults none
Command Modes EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Example (single
unit)
Dell#show buffer-profile stack-unit 0
Stack-Unit Current Buffer-Profile Next-Boot Buffer-Profile
---------- ---------------------- ------------------------
0 Default (Dynamic) Default (Dynamic)
Dell#
Related
Commands
buffer-profile (Configuration) – creates a buffer profile that can be applied to an interface.
Hardware Commands
These commands display information from a hardware sub-component or ASIC.
clear hardware stack-unit
Clear statistics from selected hardware components.
Syntax
clear hardware stack-unit id {counters | cpu {data-plane statistics | i2c
statistics | management statistics | party-bus statistics | sata-interface
statistics} | unit number counters | stack-port stack-port-number}
Parameters
stack-unit id Enter the keywords stack-unit then a number to select a particular stack
member and then enter one of the following command options to clear a specific
collection of data.
counters Enter the keyword counters to clear the counters on the selected stack member.
unit number
counters
Enter the keyword unit along with a port-pipe number, then the keyword
counters to clear the counters on the selected port-pipe. The range is from 0 to 0.
cpu data-plane
statistics
Enter the keywords cpu data-plane statistics to clear the data plane
statistics.
cpu i2c statistics Enter the keywords cpu i2c statistics to clear the i2c devices statistics.
cpu party-bus
statistics
Enter the keywords cpu party-bus statistics to clear the management
statistics.
1706 Debugging and Diagnostics