Users Guide

Virtual Router Redundancy Protocol (VRRP)
Virtual router redundancy protocol (VRRP) is supported by the Dell Networking OS.
Topics:
• IPv4 VRRP Commands
• advertise-interval
• authentication-type
• clear counters vrrp
• debug vrrp
• description
• disable
• hold-time
• preempt
• priority
• show config
• show vrrp
• track
• virtual-address
• vrrp delay minimum
• vrrp delay reload
• vrrp-group
• IPv6 VRRP Commands
• clear counters vrrp ipv6
• debug vrrp ipv6
• show vrrp ipv6
• vrrp-ipv6-group
IPv4 VRRP Commands
The following are IPv4 VRRP commands.
advertise-interval
Set the time interval between VRRP advertisements.
Syntax
advertise-interval {seconds | centisecs centisecs }
To return to the default settings, use the no advertise-interval command.
Parameters
seconds Enter the number of seconds. The range is from 1 to 255. The default is 1 second.
centisecs
centisecs
Enter the keyword centisecs then the number of centisecs in multiples of 25
centisecs. The range is 25 to 4075 centisecs in multiples of 25 centisecs.
Defaults 1 second or 100 centisecs.
Command Modes INTERFACE-VRRP
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
71
Virtual Router Redundancy Protocol (VRRP) 1681