Users Guide

Command
History
Version 9.0(1.0) Introduced on the S5000.
Usage
Information
You must save your changes before resetting the system or all your changes will be lost.
syntax help
Display command syntax information.
S5000
Syntax
syntax help
Command Modes BOOT USER
Command
History
Version
9.0(1.0)
Introduced on the S5000.
Example
BOOT_USER # syntax help
***** Dell Networking Boot Interface Help Information *****
Current access level: USER LEVEL
Use "syntax help" for more information on syntax.
Available command list (30 commands total):
boot change [primary|secondary|default]
change operating system boot parameters
boot messages disable
turn off netbsd boot messages
boot messages enable
turn on netbsd boot messages
boot show net config retries
show number of retries for network boot config failure
boot write net config retries
write number of retries for network boot config failure
boot zero [primary|secondary|default]
zero operating system boot parameters
default-gateway
default-gateway - set the default gateway ip address
enable [user|admin]
change access privilege level
help
display help menu
ignore enable-password
ignore enable password
ignore startup-config
ignore system starup-config
interface management ethernet ip address
set the management port ip address and mask
interface management port config 1000m
set the management port at 1000m
interface management port config 100m
set the management port at 100m
interface management port config 10m
set the management port at 10m
interface management port config auto-negotiate
set the management port to auto negotiate
interface management port config full-duplex
set the management port to full-duplex
interface management port config half-duplex
set the management port to half-duplex
interface management port config no auto-negotiate
set the management port to no auto negotiate. set speed and duplex
to def
1614
u-Boot