Users Guide

Simple Network Management Protocol
(SNMP) and Syslog
This section contains commands to configure and monitor the simple network management protocol (SNMP) v1/v2/v3 and
Syslog. Both features are supported on Dell Networking OS.
Topics:
• SNMP Commands
• show snmp
• show snmp engineID
• show snmp group
• show snmp user
• snmp ifmib ifalias long
• snmp-server community
• snmp-server contact
• snmp-server enable traps
• snmp-server engineID
• snmp-server group
• snmp-server host
• snmp-server location
• snmp-server packetsize
• snmp-server trap-source
• snmp-server user
• snmp-server user (for AES128-CFB Encryption)
• snmp-server view
• snmp-server vrf
• snmp trap link-status
• Syslog Commands
• clear logging
• default logging buffered
• default logging console
• default logging monitor
• default logging trap
• logging
• logging buffered
• logging console
• logging facility
• logging history
• logging history size
• logging monitor
• logging on
• logging source-interface
• logging synchronous
• logging trap
• show logging
• show logging driverlog stack-unit
• terminal monitor
58
Simple Network Management Protocol (SNMP) and Syslog 1509