Users Guide

The following describes the show interfaces private-vlan command shown in the Examples
below.
Field Description
Interface Displays the type of interface and associated slot and port number.
Vlan Displays the VLAN ID of the designated interface.
PVLAN-Type Displays the type of VLAN in which the designated interface resides.
Interface Type Displays the PVLAN port type of the designated interface.
Status States whether the interface is operationally up or down.
Example (All)
Dell# show interfaces private-vlan
Interface Vlan PVLAN-Type Interface Type Status
--------- ---- ---------- -------------- --------
Gi 2/1 10 Primary Promiscuous Up
Gi 2/2 100 Isolated Host Down
Gi 2/3 10 Primary Trunk Up
Gi 2/4 101 Community Host Up
Example
(Specific)
Dell# show interfaces private-vlan Gi 2/2
Interface Vlan PVLAN-Type Interface Type Status
--------- ---- ---------- -------------- --------
Gi 2/2 100 Isolated Host Up
Related
Commands
private-vlan mode – sets the mode of the selected VLAN to community, isolated, or primary.
show vlan private-vlan – displays the PVLANs and/or interfaces that are part of a PVLAN.
show vlan private-vlan mapping – displays the primary-secondary VLAN mapping.
switchport mode private-vlan – sets PVLAN mode of the selected port.
show vlan private-vlan
Display PVLANs and/or interfaces that are part of a PVLAN.
Syntax
show vlan private-vlan [vlan-id | community vlan-id | interface [interface
| isolated vlan-id | mapping vlan-id | primary primary_vlan]
Parameters
vlan-id (OPTIONAL) Enter a VLAN ID number to display the PVLAN configuration.
community vlan-
id
(OPTIONAL) Enter the keyword community and a PVLAN ID number to display
the configuration for a community PVLAN.
interface
interface
(OPTIONAL) Enter the keyword interface followed by the interface type and
slot/port numbers or port-channel number to display the PVLAN configuration for a
member interface. The range of Z9500 slot IDs is 0 to 2. The valid values are:
● port-channel port-channel-number
● tengigabitethernet slot/port
● fortygigE slot/port
isolated vlan-id (OPTIONAL) Enter the keyword isolated to display VLANs configured as
isolated VLANs, along with their interfaces.
mapping vlan-id (OPTIONAL) Enter the keyword mapping to display the community and isolated
PVLAN mapping to primary PVLANs.
primary vlan-id (OPTIONAL) Enter the keyword primary to display VLANs configured as primary
VLANs, along with their interfaces.
Defaults none
Private VLAN (PVLAN) 1353