Users Guide

Command Modes INTERFACE VLAN
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the C-Series and S-Series.
Usage
Information
The list of secondary VLANs can be:
● Specified in comma-delimited or hyphenated-range format.
● Specified with this command even before they have been created.
● Amended by specifying the new secondary VLAN to be added to the list.
Related
Commands
● private-vlan mode — sets the mode of the selected VLAN to community, isolated, or primary.
● switchport mode private-vlan — sets PVLAN mode of the selected port.
show interfaces private-vlan
Display type and status of PVLAN interfaces.
Syntax
show interfaces private-vlan [interface interface]
Parameters
interface
interface
(OPTIONAL) Enter the keyword interface followed by the interface type and
slot/port numbers or port-channel number to specify the port(s) for which you
want to display PVLAN information.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
Version Description
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.1 Introduced on the S4810.
7.8.1.0 Introduced on the C-Series and S-Series.
Usage
Information
This command has two types of display — a list of all PVLAN interfaces or for a specific interface.
Examples of both types of output are shown below.
1352 Private VLAN (PVLAN)