Users Guide

● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
● For a Loopback interface, enter the keyword loopback then a number from 0
to 16383.
● For a port-channel interface, enter the keywords port-channel then the
port-channel ID.
● For a VLAN, enter the keyword vlan then a number from 1 to 4094.
priority (OPTIONAL) Enter the priority used in Bootstrap election process. The range is
zero (0) to 255. The default is 192.
Defaults Not configured.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.7(0.0) Added support for VRF. Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.8.1.0 Introduced on the S-Series.
pre- 6.1.1.1 Introduced on the E-Series.
Usage
Information
Priority is stored at BSR router when receiving a Candidate-RP-Advertisement.
ip pim snooping
Enable PIM-SM snooping globally on a switch or on a VLAN interface.
Syntax
ip pim snooping [enable]
To disable PIM-SM snooping, use the no ip pim snooping [enable] command.
Defaults Disabled.
Command Modes
● CONFIGURATION: To configure PIM-SM snooping globally, enter the ip pim snooping enable
command in global configuration mode.
● VLAN INTERFACE: To configure PIM-SM snooping on a VLAN interface, enter the ip pim
snooping command in VLAN interface configuration mode.
Command
History
Version Description
9.0(1.3) Introduced on the S5000.
8.3.12.0 Introduced on the S4810.
8.4.1.1 Introduced on the E-Series ExaScale.
PIM-Sparse Mode (PIM-SM) 1263