Users Guide

Parameters
vlan vlan-id (OPTIONAL) Enter a VLAN ID to clear tree information base (TIB) information
learned through PIM-SM snooping about a specified VLAN. The valid VLAN IDs are
1 to 4094.
group-address (OPTIONAL) Enter a multicast group address in dotted decimal format (A.B.C.D) to
clear TIB information learned through PIM-SM snooping about a specified multicast
group.
Command Modes EXEC Privilege
Command
History
Version Description
8.4.1.1 Introduced on the E-Series ExaScale.
8.3.21.0 Introduced on the S5000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Related
Commands
show ip pim snooping tib – displays TIB information learned through PIM-SM snooping.
clear ip pim tib
Clear PIM tree information from the PIM database.
S5000
Syntax
clear ip pim [vrf vrf-name] tib [group]
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf followed by the name of the VRF to configure
this setting on that VRF.
NOTE: Applies to specific VRF if input is provided, else applies to Default VRF.
group (OPTIONAL) Enter the multicast group address in dotted decimal format (A.B.C.D).
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added support for VRF. Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
1252 PIM-Sparse Mode (PIM-SM)