Users Guide

PIM-Sparse Mode (PIM-SM)
The protocol-independent multicast (PIM) commands are supported by the Dell Networking operating software on the platform.
The following describes the IPv4 PIM-SIM commands.
Topics:
• IPv4 PIM-Sparse Mode Commands
• clear ip pim snooping tib
• clear ip pim tib
• clear ip pim rp-mapping
• debug ip pim
• ip pim bsr-border
• ip pim bsr-candidate
• ip pim dr-priority
• ip pim graceful-restart
• ip pim join-filter
• ip pim ingress-interface-map
• ip pim neighbor-filter
• ip pim query-interval
• ip pim register-filter
• ip pim rp-address
• ip pim rp-candidate
• ip pim snooping
• ip pim sparse-mode
• ip pim sparse-mode sg-expiry-timer
• ip pim ssm-range
• ip pim spt-threshold
• no ip pim snooping dr-flood
• show ip pim bsr-router
• show ip pim interface
• show ip pim neighbor
• show ip pim rp
• show ip pim snooping interface
• show ip pim snooping neighbor
• show ip pim snooping tib
• show ip pim ssm-range
• show ip pim summary
• show ip pim tib
• show running-config pim
IPv4 PIM-Sparse Mode Commands
The following describes the IPv4 PIM-sparse mode (PIM-SM) commands.
clear ip pim snooping tib
Clear tree information discovered by PIM-SM snooping from the PIM database.
Syntax
clear ip pim snooping tib [vlan vlan-id] [group-address]
45
PIM-Sparse Mode (PIM-SM) 1251