Users Guide

Field Description
waiting for FLOGI to complete on peer FC port), or Removed (port has been shut
down).
Members S5000 Ethernet and FC ports that are members of the dedicated FCoE VLAN that
carries storage traffic to the specified fabric.
Example
Dell#show fcoe-map brief
Fabric-Name Fabric-Id Vlan-Id FC-MAP FCF-Priority Config-State
Oper-State
default_full_fabric 1002 1002 0efc00 128 ACTIVE
UP
Dell#
Dell#show fcoe-map
Fabric Name default_full_fabric
Fabric Type full-fabric
Fabric Id 1002
Vlan Id 1002
Vlan priority 3
FC-MAP 0efc00
FKA-ADV-Period 8
Fcf Priority 128
Config-State ACTIVE
Oper-State UP
=======================================================
Switch Config Parameters
=======================================================
R_A_TOV (ms) 10000
R_T_TOV (ms) 100
E_D_TOV (ms) 2000
DomainID 2
DomainID-Locked OFF
Principal-Pri 254
=======================================================
Switch Zoning Parameters
=======================================================
Default Zone Mode: Deny
Active Zoneset: None
=======================================================
Members
Fc 0/0 Fc 0/1 Fc 0/2 Fc 0/3 Fc 0/4 Fc 0/5 Fc 0/6 Fc 0/7 Fc 0/8 Fc 0/9 Fc
0/10 Fc 0/11
=======================================================
=======================================================
Dell#
Related
Commands
fcoe-map — creates an FCoE map which contains the parameters used in the communication between
servers and a SAN fabric.
fc zoneset — creates a zoneset.
show npiv devices
Display the FCoE and FC devices currently logged in to an S5000 NPIV proxy gateway.
S5000
Syntax
show npiv devices [brief]
NPIV Proxy Gateway 1137