Users Guide

Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Added the vlan option on the E-Series.
7.7.1.0 Introduced on the C-Series and S-Series.
pre-6.2.1.1 Introduced on the E-Series.
Example
Dell# show mac-address-table aging-time
Mac-address-table aging time : 1800
Dell#
Related
Commands
● show mac-address-table — display the current MAC address configuration.
show mac accounting access-list
Display destination counters for Layer 2 traffic (available on physical interfaces only).
S5000
Syntax
show mac accounting {access—list name {interface type slot/port} {in |
out}}}
Parameters
access-list name Enter the name of a configured access-list, up to 140 characters.
interface type
slot/port
(OPTIONAL) Enter the keyword interface followed by the interface type, slot
and port information:
● For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers. The port range is 0 to
63.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed
by slot/port numbers. The ports are 48, 52, 56, and 60.
● For a Port Channel interface, enter the keywords port-channel followed by
a number from 1 to 128.
in | out Identify whether the ACL is applied on the ingress or egress side.
Command Modes
● EXEC
● EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Layer 2 1011