Reference Guide

Simple Network Management Protocol (SNMP) | 831
To configure system contact and location information from the Dell Networking system:
To configure the system from the management station using SNMP:
Task Command Command Mode
Identify the system manager along with this person’s contact
information (e.g., E-mail address or phone number). You may
use up to 55 characters.
Default: None
snmp-server contact text CONFIGURATION
Identify the physical location of the system. For example, San
Jose, 350 Holger Way, 1st floor lab, rack A1-1. You may use up
to 55 characters.
Default: None
snmp-server location text CONFIGURATION
Task Command Command Mode
Identify the system manager along with this person’s
contact information (e.g., E-mail address or phone
number). You may use up to 55 characters.
Default: None
snmpset -v version -c community
agent-ip sysContact.0 s “contact-info”
CONFIGURATION
Identify the physical location of the system. For
example, San Jose, 350 Holger Way, 1st floor lab,
rack A1-1. You may use up to 55 characters.
Default: None
snmpset -v version -c community
agent-ip sysLocation.0 s “location-info”
CONFIGURATION