Reference Guide

72 | Switch Management
www.dell.com | support.dell.com
Displaying the Logging Buffer and the Logging Configuration
Display the current contents of the logging buffer and the logging settings for the system, use the show
logging
command in the EXEC privilege mode as shown in the example below.
Figure 4-2. show logging Command Example
To view any changes made, use the show running-config logging command (Figure 4-3) in the EXEC
privilege mode.
Dell #show logging
Syslog logging: enabled
Console logging: level debugging
Monitor logging: level debugging
Buffer logging: level debugging, 50 Messages Logged, Size (40960 bytes)
Trap logging: level informational
Logging to 172.16.1.162
Logging to 10.10.10.4
Logging to 10.1.2.4
Logging to 172.31.1.4
Logging to 133.33.33.4
Apr 30 11:14:33: %STKUNIT1-M:CP %SYS-5-CONFIG_I: Configured from vty0 ( 10.11.51.14 )by admin
Apr 30 10:13:08: %STKUNIT1-M:CP %SYS-5-CONFIG_I: Configured from vty0 ( 10.11.51.14 )by admin
Apr 30 10:06:41: %STKUNIT1-M:CP %SEC-3-AUTHENTICATION_ENABLE_SUCCESS: Enable password authentication
success on vty0 ( 10.11.51.14 )
Apr 30 10:06:36: %STKUNIT1-M:CP %SEC-5-LOGIN_SUCCESS: Login successful for user admin on vty0
10.11.51.14)
Apr 26 12:02:48: %S5000:1 %IFAGT-5-STACK_PORT_LINK_DOWN: Changed stack port state to down: 1/56
Apr 26 11:52:45: %S5000:1 %IFAGT-5-STACK_PORT_LINK_UP: Changed stack port state to up: 1/56
Apr 26 11:51:13: %S5000:1 %IFAGT-5-STACK_PORT_LINK_DOWN: Changed stack port state to down: 1/56
Apr 26 11:51:01: %S5000:1 %IFAGT-5-STACK_PORT_LINK_DOWN: Changed stack port state to down: 1/48
Apr 26 11:48:57: %S5000:1 %IFAGT-5-STACK_PORT_LINK_UP: Changed stack port state to up: 1/56
Apr 26 11:48:47: %S5000:1 %IFAGT-5-STACK_PORT_LINK_UP: Changed stack port state to up: 1/48
Apr 26 11:43:52: %S5000:1 %IFAGT-5-STACK_PORT_LINK_DOWN: Changed stack port state to down: 1/48
Apr 26 11:43:43: %S5000:1 %IFAGT-5-STACK_PORT_LINK_DOWN: Changed stack port state to down: 1/56
Apr 26 11:33:08: %S5000:1 %IFAGT-5-STACK_PORT_LINK_UP: Changed stack port state to up: 1/48
Apr 26 11:33:08: %S5000:1 %IFAGT-5-STACK_PORT_LINK_UP: Changed stack port state to up: 1/56
Apr 25 11:07:15: %S5000:1 %IFAGT-5-REMOVED_OPTICS_PLUS: Optics SFP+ removed in slot 1 port 2
Apr 25 11:07:14: %S5000:1 %IFAGT-5-REMOVED_OPTICS_PLUS: Optics SFP+ removed in slot 1 port 3
!------------------- output truncated ------------------!