Reference Guide

566 | Link Layer Discovery Protocol (LLDP)
www.dell.com | support.dell.com
In Figure 30-8, LLDP is enabled globally. R1 and R2 are transmitting periodic LLDPDUs that contain
management, 802.1, and 802.3 TLVs.
Figure 30-8. Configuring LLDP
2 Advertise one or more TLVs. Include the
keyword for each TLV you want to advertise.
• For management TLVs:
system-capabilities, system-description
For 802.1 TLVs: port-protocol-vlan-id,
port-vlan-id, vlan-name
• For 802.3 TLVs: max-frame-size
• For TIA-1057 TLVs:
• guest-voice
• guest-voice-signaling
• location-identification
• power-via-mdi
• softphone-voice
• streaming-video
• video-conferencing
• video-signaling
• voice
• voice-signaling
advertise {management-tlv |
dot1-tlv | dot3-tlv | med}
PROTOCOL LLDP
Note: The vlan-name command is supported on C-Series and S-Series only.
Step Task Command Command Mode