Reference Guide

IPv6 Routing | 535
Figure 27-5 illustrates the show ipv6 route command output.
Figure 27-5. Command Example: show ipv6 route
Figure 27-6 illustrates the show ipv6 route summary command output.
Figure 27-6. Command Example: show ipv6 route summary
Figure 27-7 illustrates the show ipv6 route static command output.
Figure 27-7. Command Example: show ipv6 route static
Dell#show ipv6 route
Codes: C - connected, L - local, S - static, R - RIP,
B - BGP, IN - internal BGP, EX - external BGP,LO - Locally Originated,
O - OSPF, IA - OSPF inter area, N1 - OSPF NSSA external type 1,
N2 - OSPF NSSA external type 2, E1 - OSPF external type 1,
E2 - OSPF external type 2, i - IS-IS, L1 - IS-IS level-1,
L2 - IS-IS level-2, IA - IS-IS inter area, * - candidate default,
Gateway of last resort is not set
Destination Dist/Metric, Gateway, Last Change
-----------------------------------------------------
C 2001::/64 [0/0]
Direct, Te 1/1, 00:28:49
C 2002::/120 [0/0]
Direct, Te 1/1, 00:28:49
C 2003::/120 [0/0]
Direct, Te 1/1, 00:28:49
Dell#show ipv6 route summary
Route Source Active Routes Non-active Routes
connected 5 0
static 0 0
Total 5 0
Dell#show ipv6 route static
Destination Dist/Metric, Gateway, Last Change
-----------------------------------------------------
S 8888:9999:5555:6666:1111:2222::/96 [1/0]
via 2222:2222:3333:3333::1, Te 9/1, 00:03:16
S 9999:9999:9999:9999::/64 [1/0]
via 8888:9999:5555:6666:1111:2222:3333:4444, 00:03:16