Reference Guide

IPv6 Routing | 533
Showing an IPv6 Interface
View the IPv6 configuration for a specific interface with the following command.
Figure 27-4 illustrates the
show ipv6 interface command output.
Dell#show ipv6 ?
accounting IPv6 accounting information
cam IPv6 CAM Entries
fib IPv6 FIB Entries
interface IPv6 interface information
mbgproutes MBGP routing table
mld MLD information
mroute IPv6 multicast-routing table
neighbors IPv6 neighbor information
ospf OSPF information
pim PIM V6 information
prefix-list List IPv6 prefix lists
route IPv6 routing information
rpf RPF table
Dell#
Command Syntax Command Mode Purpose
show ipv6 interface type {slot/
port}
EXEC Show the currently running configuration for the
specified interface
Enter the keyword interface followed by the type of
interface and slot/port information:
• For all brief summary of IPv6 status and
configuration, enter the keyword brief.
• For all IPv6 configured interfaces, enter the
keyword configured.
• For a Gigabit Ethernet interface, enter the
keyword GigabitEthernet followed by the slot/
port information.
• For a 10 Gigabit Ethernet interface, enter the
keyword TenGigabitEthernet followed by the
slot/port information.
• For a 40-Gigabit Ethernet interface, enter the
keyword fortyGigE followed by the slot/port
information.
• For a loopback interface, enter the keyword
loopback followed by the loopback number
• For a port-channel interface, enter the keyword
port-channel followed by the port-channel
number
• For a VLAN interface, enter the keyword vlan
followed by the VLAN ID
Command Syntax Command Mode Purpose