Reference Guide

Getting Started | 49

Booting Process

After you set up the S5000 as described in the installation procedure in the S5000 Getting Started Guide,

the switch boots up. Figure 3-2 shows an example of the completed boot process.

Figure 3-2. Completed Boot Process (1 of 3 screens)

U-Boot 2012.04(Dell Networking)

Built by build at tools-sjc-01 on Tue Jan 15 0:50:03 2013

S5000 Boot Selector Label 1.3.0.0m

CPU0: P2020, Version: 2.1, (0x80e20021)

Core: E500, Version: 5.1, (0x80211051)

Board: S5000 Dell CPU

CPLD: S5000 CPLD Rev 41

Board Revision 1

Boot Selector set to Bootflash Partition A image...

Verifying Copyright Information..success for Image - 0

Boot Selector: Booting Bootflash Partition A image...

Copying stage-2 loader from 0x800000 to 0x7f800000(size = 0x200000)

F10 Boot Image selection DONE.

## Starting application at 0x7F800090 ...

U-Boot 2012.04(Dell Networking)

Built by build at tools-sjc-01 on Thu Mar 14 16:45:06 2013

S5000 Boot Loader Label 1.3.1.1p

Mgmt MAC Addr: 5C:F9:DD:EF:0A:42

SF: Detected W25Q128 with page size 4 KiB, total 16 MiB

Hit any key to stop autoboot: 0

Loading POST from Bootflash Partition A

## Starting application at 0x78000000 ...

auto-booting...