Reference Guide

Fibre Channel Interface | 457
Figure 23-2. show fc switch Command Example
Figure 23-3. show running-config | grep switch-mode Command Example
RxOfflineSequences Number of offline sequences received.
TxOfflineSequences Number of offline sequences transmitted.
TotalOfflineSequences Total number of offline sequences.
Rate Information:
Input bytes/sec, frames/sec,
% of line-rate
Incoming rate of FC traffic in bytes per second, frames per second, and
percentage of the total line rate.
Output bytes/sec, frames/sec,
% of line-rate
Outgoing rate of FC traffic in bytes per second, frames per second, and
percentage of the total line rate.
Time since last interface status
change
Elapsed time since the operational status of the interface last changed.
Table 23-3. show fc switch Command Description
Field Description
Switch Mode Operational mode of an S5000 switch. Default: NPG.
Switch WWN Factory-assigned worldwide node (WWN) name of the S5000. The S5000
WWN name is not user-configurable.
Table 23-2. show interfaces fibrechannel Command Description
Field Description
Dell# show fc switch
Switch Mode : NPG
Switch WWN : 10:00:5c:f9:dd:ef:24:40
Dell#
Dell#Show running-config | grep switch-mode
fc switch-mode fabric-services
Dell#