Reference Guide

444 | Fabric Services
www.dell.com | support.dell.com
Table 22-4. Display Fabric Parameter information
Figure 22-6. show Config Command Example
Command Output
show config (Figure 22-6) Displays the fabric parameters on the S5000 switch
show fcoe-map (Figure 22-7) Displays the fcoe-map on the S5000 switch
show fc fabric (Figure 22-8) Displays the information on all switches in the fabric
show fc lsdb (Figure 22-9)
Displays the Link State Database information on the S5000 switch
show fc ns switch (Figure 22-10) Displays the local name server entries
show fc ns switch brief (Figure 22-11) Displays the local name server entries - brief version
show fc ns fabric (Figure 22-12) Displays the fabric name server entries
show fc ns fabric brief (Figure 22-13) Displays the fabric name server entries - brief version
show fc route (Figure 22-14) Displays the route table on the switch
show fc zoneset (Figure 22-15 ) Displays the zoneset
show fc zoneset active (Figure 22-16) Displays the Active Zoneset
show fc zoneset merged (Figure 22-17) Displays the merged active zones
show fc zone (Figure 22-18) Displays the configured zone
show fc alias (Figure 22-19) Displays the configured alias
show fc switch (Figure 22-20) Displays the FC Switch mode and World Wide Name
show fc topology (Figure 22-21) Displays the topology information of the local switch
Dell(conf)#Dell(conf-fmap-default_full_fabric-fcfabric)#show config
domain-id 3
principal-priority 253
E-D-TOV 101
R-A-TOV 10001
R-T-TOV 101
default-zone-allow all
active-zoneset zs1
Dell(conf-fmap-default_full_fabric-fcfabric)#