Reference Guide

Data Center Bridging (DCB) | 305
Remote is enabled, Priority list
Remote Willing Status is
enabled
Operational status (enabled or disabled) of peer device for DCBx exchange of
PFC configuration with a list of the configured PFC priorities.
Willing status of peer device for DCBx exchange (Willing bit received in PFC
TLV): enabled or disabled.
Local is enabled DCBx operational status (enabled or disabled) with a list of the configured
PFC priorities.
Operational status (local port) Port state for current operational PFC configuration:
Init: Local PFC configuration parameters were exchanged with peer.
Recommend: Remote PFC configuration parameters were received from
peer.
Internally propagated: PFC configuration parameters were received from
configuration source.
PFC DCBx Oper status DCBx operational status of the exchange of PFC configuration on local port:
up (match) or down (mismatch).
Reason Reason displayed when the DCBx operational status for PFC on a port is
down. See Table 13-9 for a description of each reason.
State Machine Type Type of state machine used for DCBx exchanges of PFC parameters:
Feature - for legacy DCBx versions; Symmetric - for an IEEE version.
TLV Tx Status Status of PFC TLV advertisements: enabled or disabled.
PFC Link Delay Link delay (in quanta) used to pause specified priority traffic.
Application Priority TLV:
FCOE TLV Tx Status
Status of FCoE advertisements in application priority TLVs from local DCBx
port: enabled or disabled.
Application Priority TLV:
ISCSI TLV Tx Status
Status of ISCSI advertisements in application priority TLVs from local DCBx
port: enabled or disabled.
Application Priority TLV:
Local FCOE Priority Map
Priority bitmap used by local DCBx port in FCoE advertisements in
application priority TLVs.
Application Priority TLV:
Local ISCSI Priority Map
Priority bitmap used by local DCBx port in ISCSI advertisements in
application priority TLVs.
Application Priority TLV:
Remote FCOE Priority Map
Status of FCoE advertisements in application priority TLVs from remote peer
port: enabled or disabled.
Application Priority TLV:
Remote ISCSI Priority Map
Status of iSCSI advertisements in application priority TLVs from remote peer
port: enabled or disabled.
Input TLV pkts
Output TLV pkts
Error TLV pkts
Pause Tx pkts
Pause Rx pkts
Number of PFC TLVs received.
Number of PFC TLVs transmitted.
Number of PFC error packets received.
Number of PFC pause frames transmitted.
Number of PFC pause frames received.
Table 13-3. show interfaces pfc Field Descriptions
Field Description