Reference Guide

266 | Content Addressable Memory (CAM)
www.dell.com | support.dell.com
Displaying CAM-ACL Settings
The show cam-acl command is supported on the S5000 to display the current CAM ACL settings for each
ingress region. The default ingress CAM ACL allocation settings on an S5000 (stack unit 0) are:
Dell#show cam-acl
-- Chassis Cam ACL --
Current Settings(in block sizes)
L2Acl : 4
Ipv4Acl : 4
Ipv6Acl : 0
Ipv4Qos : 2
L2Qos : 1
L2PT : 0
IpMacAcl : 0
VmanQos : 0
VmanDualQos : 0
EcfmAcl : 0
FcoeAcl : 2
iscsiOptAcl : 0
-- Stack unit 0 --
Current Settings(in block sizes)
L2Acl : 4
Ipv4Acl : 4
Ipv6Acl : 0
Ipv4Qos : 2
L2Qos : 1
L2PT : 0
IpMacAcl : 0
VmanQos : 0
VmanDualQos : 0
EcfmAcl : 0
FcoeAcl : 2
iscsiOptAcl : 0
Dell#