Reference Guide

Bare Metal Provisioning 2.0 | 261
Release Image Minor Version : 0
Release Image Main Version : 0
Release Image Patch Version : 224
00:02:47: %STKUNIT0-M:CP %JUMPSTART-2-JUMPSTART_DOWNLOAD_START: The config file download
has started.
00:02:47: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_RELEASE: DHCP RELEASE sent on Te 0/7.
00:02:47: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_DOWNLOAD: The config file download is
successful.
00:02:47: %STKUNIT0-M:CP %JUMPSTART-5-CFG_APPLY: The downloaded config from dhcp server is
being applied
00:02:47: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_RELEASE: DHCP RELEASE sent on Te 0/7.
00:02:47: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_DOWNLOAD: The config file download is
successful.
00:02:47: %STKUNIT0-M:CP %JUMPSTART-5-CFG_APPLY: The downloaded config from dhcp server is
being applied
c If the configuration file is downloaded from the server, any saved startup-configuration on the
flash is ignored. If no configuration file is downloaded from the server or the
config-download
parameter is disable, the startup-configuration file on the flash is loaded as in normal reload.
6. When the Dell Networking OS image and the configuration file have been downloaded, the IP address
is released.
00:04:06: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_RELEASE: DHCP RELEASE sent on Fo 0/56.
00:04:06: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Fo 0/56
7. The switch applies the configuration. The switch is now up and running. It can be managed as usual.