Reference Guide

Border Gateway Protocol IPv4 (BGPv4) | 229
Use the following command in the CONFIGURATION ROUTER BGP mode to aggregate routes.
AS_SET includes AS_PATH and community information from the routes included in the aggregated route.
In the
show ip bgp command, aggregates contain an ‘a’ in the first column and routes suppressed by the
aggregate contain an ‘s’ in the first column.
Figure 9-30. Command Example: show ip bgp
Command Syntax Command Mode Purpose
aggregate-address ip-address mask
[advertise-map map-name] [as-set]
[attribute-map map-name]
[summary-only] [suppress-map
map-name]
CONFIG-ROUTER-
BGP
Assign the IP address and mask of the prefix to be
aggregated.
Optional parameters are:
• advertise-map map-name: set filters for
advertising an aggregate route
• as-set: generate path attribute information and
include it in the aggregate.
•
attribute-map map-name: modify attributes of the
aggregate, except for the AS_PATH and NEXT_HOP
attributes
• summary-only: advertise only the aggregate
address. Specific routes will not be advertised
• suppress-map map-name: identify which
more-specific routes in the aggregate are suppressed
Dell#show ip bgp
BGP table version is 0, local router ID is 10.101.15.13
Status codes: s suppressed, d damped, h history, * valid, > best
Path source: I - internal, a - aggregate, c - confed-external, r - redistributed, n - network
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 7.0.0.0/29 10.114.8.33 0 0 18508 ?
*> 7.0.0.0/30 10.114.8.33 0 0 18508 ?
*>a 9.0.0.0/8 192.0.0.0 32768 18508 701 {7018 2686 3786} ?
*> 9.2.0.0/16 10.114.8.33 0 18508 701 i
*> 9.141.128.0/24 10.114.8.33 0 18508 701 7018 2686 ?
Dell#
Aggregate Route
Indicators