Users Guide

Required Type : -
-- Unit 3 --
Unit Type : Member Unit
Status : not present
Required Type : -
-- Unit 4 --
Unit Type : Member Unit
Status : not present
Required Type : -
-- Unit 5 --
Unit Type : Member Unit
Status : not present
Required Type : -
-- Unit 6 --
Unit Type : Member Unit
Status : not present
Required Type : -
-- Unit 7 --
Unit Type : Member Unit
Status : not present
Required Type : -
-- Unit 8 --
Unit Type : Member Unit
Status : not present
Required Type : -
-- Unit 9 --
Unit Type : Member Unit
Status : not present
Required Type : -
-- Unit 10 --
Unit Type : Member Unit
Status : not present
Required Type : -
-- Unit 11 --
Unit Type : Member Unit
Status : not present
Required Type : -
Dell#
Provisioning a Stack Unit
You can logically provision a stack-unit number to accept only an S5000 switch.
Provisioning is a type of pre-conguration that is stored on the master switch and applied when a stacked unit is assigned the unit
number.
1. Create a virtual stack unit by logically provisioning a switch.
CONFIGURATION mode
stack-unit unit-number provision S5000
2. Save the provisioning conguration.
EXEC Privilege mode
write memory
3. Reload the stack for the provisioning reconguration to take eect.
Stacking
841