Users Guide

logging buffered size
• Specify the number of messages that Dell Networking OS saves to its logging history table.
CONFIGURATION mode
logging history size size
To view the logging buer and conguration, use the show logging command in EXEC privilege mode, as shown in the example
for Display the Logging Buer and the Logging Conguration.
To view the logging conguration, use the show running-config logging command in privilege mode, as shown in the
example for Conguring a UNIX Logging Facility Level.
Display the Logging Buer and the Logging Conguration
To display the current contents of the logging buer and the logging settings for the system, use the show logging command in
EXEC privilege mode.
Example of the show logging Command
Dell #show logging
Syslog logging: enabled
Console logging: level debugging
Monitor logging: level debugging
Buffer logging: level debugging, 50 Messages Logged, Size (40960 bytes)
Trap logging: level informational
Logging to 172.16.1.162
Logging to 10.10.10.4
Logging to 10.1.2.4
Logging to 172.31.1.4
Logging to 133.33.33.4
Apr 30 11:14:33: %STKUNIT1-M:CP %SYS-5-CONFIG_I: Configured from vty0 ( 10.11.51.14 )by
admin
Apr 30 10:13:08: %STKUNIT1-M:CP %SYS-5-CONFIG_I: Configured from vty0 ( 10.11.51.14 )by
admin
Apr 30 10:06:41: %STKUNIT1-M:CP %SEC-3-AUTHENTICATION_ENABLE_SUCCESS: Enable password
authentication
success on vty0 ( 10.11.51.14 )
Apr 30 10:06:36: %STKUNIT1-M:CP %SEC-5-LOGIN_SUCCESS: Login successful for user admin on
vty0
10.11.51.14)
Apr 26 12:02:48: %S5000:1 %IFAGT-5-STACK_PORT_LINK_DOWN: Changed stack port state to down:
1/56
Apr 26 11:52:45: %S5000:1 %IFAGT-5-STACK_PORT_LINK_UP: Changed stack port state to up: 1/56
Apr 26 11:51:13: %S5000:1 %IFAGT-5-STACK_PORT_LINK_DOWN: Changed stack port state to down:
1/56
Apr 26 11:51:01: %S5000:1 %IFAGT-5-STACK_PORT_LINK_DOWN: Changed stack port state to down:
1/48
Apr 26 11:48:57: %S5000:1 %IFAGT-5-STACK_PORT_LINK_UP: Changed stack port state to up: 1/56
Apr 26 11:48:47: %S5000:1 %IFAGT-5-STACK_PORT_LINK_UP: Changed stack port state to up: 1/48
Apr 26 11:43:52: %S5000:1 %IFAGT-5-STACK_PORT_LINK_DOWN: Changed stack port state to down:
1/48
Apr 26 11:43:43: %S5000:1 %IFAGT-5-STACK_PORT_LINK_DOWN: Changed stack port state to down:
1/56
Apr 26 11:33:08: %S5000:1 %IFAGT-5-STACK_PORT_LINK_UP: Changed stack port state to up: 1/48
Apr 26 11:33:08: %S5000:1 %IFAGT-5-STACK_PORT_LINK_UP: Changed stack port state to up: 1/56
Apr 25 11:07:15: %S5000:1 %IFAGT-5-REMOVED_OPTICS_PLUS: Optics SFP+ removed in slot 1 port 2
Apr 25 11:07:14: %S5000:1 %IFAGT-5-REMOVED_OPTICS_PLUS: Optics
To view any changes made, use the show running-config logging command in EXEC privilege mode, as shown in the
example for Conguring a UNIX Logging Facility Level.
Switch Management
73