Users Guide

To redistribute routes, use the following command.
• Specify which routes are redistributed into OSPF process.
CONFIG-ROUTEROSPF-id mode
redistribute {bgp | connected | isis | rip | static} [metric metric-value | metric-type
type-value] [route-map map-name] [tag tag-value]
Congure the following required and optional parameters:
– bgp, connected, isis, rip, static: enter one of the keywords to redistribute those routes.
– metric metric-value: the range is from 0 to 4294967295.
– metric-type metric-type: 1 for OSPF external route type 1. 2 for OSPF external route type 2.
– route-map map-name: enter a name of a congured route map.
– tag tag-value: the range is from 0 to 4294967295.
Example of Viewing OSPF Conguration after Redistributing Routes
To view the current OSPF conguration, use the show running-config ospf command in EXEC mode or the show config
command in ROUTER OSPF mode.
Dell(conf-router_ospf)#show config
!
router ospf 34
network 10.1.2.32 0.0.0.255 area 2.2.2.2
network 10.1.3.24 0.0.0.255 area 3.3.3.3
distribute-list dilling in
Dell(conf-router_ospf)#
Troubleshooting OSPFv2
Dell Networking OS has several tools to make troubleshooting easier.
Be sure to check the following, as these questions represent typical issues that interrupt an OSPFv2 process.
NOTE: The following is not a comprehensive list, just some examples of typical troubleshooting checks.
• Have you enabled OSPF globally?
• Is the OSPF process active on the interface?
• Are adjacencies established correctly?
• Are the interfaces congured for Layer 3 correctly?
• Is the router in the correct area type?
• Have the routes been included in the OSPF database?
• Have the OSPF routes been included in the routing table (not just the OSPF database)?
Some useful troubleshooting commands are:
• show interfaces
• show protocols
• debug IP OSPF events and/or packets
• show neighbors
• show virtual links
• show routes
To help troubleshoot OSPFv2, use the following commands.
• View the summary of all OSPF process IDs enables on the router.
EXEC Privilege mode
show running-config ospf
Open Shortest Path First (OSPFv2)
615