Users Guide

– For a Loopback interface, enter the keyword loopback then the Loopback number.
– For a port-channel interface, enter the keywords port-channel then the port-channel number.
– For a VLAN interface, enter the keyword vlan then the VLAN ID.
Example of the show ipv6 interface Command
Dell#show ipv6 interface te 2/2
TenGigabitEthernet 2/2 is down, line protocol is down
IPV6 is enabled
Link Local address: fe80::201:e8ff:fe06:95a3
Global Unicast address(es):
3:4:5:6::8, subnet is 3::/24
Global Anycast address(es):
Joined Group address(es):
ff02::1
ff02::2
ff02::1:ff00:8
ff02::1:ff06:95a3
MTU is 1500
ICMP redirects are not sent
DAD is enabled, number of DAD attempts: 1
ND reachable time is 30 seconds
ND advertised reachable time is 30 seconds
ND advertised retransmit interval is 30 seconds
ND router advertisements are sent every 200 seconds
ND router advertisements live for 1800 seconds
Showing IPv6 Routes
To view the global IPv6 routing information, use the following command.
• Show IPv6 routing information for the specied route type.
EXEC mode
show ipv6 route type
The following keywords are available:
– To display information about a network, enter ipv6 address (X:X:X:X::X).
– To display information about a host, enter hostname.
– To display information about all IPv6 routes (including non-active routes), enter all.
– To display information about all connected IPv6 routes, enter connected.
– To display information about brief summary of all IPv6 routes, enter summary.
– To display information about Border Gateway Protocol (BGP) routes, enter bgp.
– To display information about ISO IS-IS routes, enter isis.
– To display information about Open Shortest Path First (OSPF) routes, enter ospf.
– To display information about Routing Information Protocol (RIP), enter rip.
– To display information about static IPv6 routes, enter static.
– To display information about an IPv6 Prex lists, enter list and the prex-list name.
Examples of the show ipv6 route Commands
The following example shows the show ipv6 route summary command.
Dell#show ipv6 route summary
Route Source Active Routes Non-active Routes
connected 5 0
444
IPv6 Routing