Users Guide

INTERFACE FIBRE_CHANNEL mode
speed {auto | 2G | 4G | 8G}
The valid values are: 2, 4 Gbps or 8 Gbps or autosensing.
The default is an FC port autosenses the speed of a peer FC port.
3. Enable the Fibre Channel port.
INTERFACE FIBRE_CHANNEL mode
no shutdown
Displaying Fibre Channel Information
To display information on switch-wide and interface-specic Fibre Channel operation, use the following commands.
Examples of the show commands follow this table.
Command Description
show interfaces
brechannel
Displays the conguration of an FC interface.
clear counters
brechannel slot/
port
Clears the statistics (counters) the show interfaces fibrechannel command output displays for a
specied FC port.
show fc switch Displays the switch conguration for Fibre Channel capability.
show running-cong
| grep feature
Displays the currently running conguration feature.
show running-cong
| grep feature
Displays the currently running conguration for the switch-mode.
Example of the show interfaces fibrechannel Command
Dell#show interfaces fibrechannel 0/0
FibreChannel 0/0 is up, FC link is down
Non-qualified pluggable media present, SFP+ type is FC-8GBPS-SR
Wavelength is 850nm
SFP+ receive power reading is -3.6021dBm
Interface index is 33719304
MTU 2148 bytes
LineSpeed auto
Port type is Undefined, Max BB Credits is 16
WWN is 20:00:5c:f9:dd:ef:24:40, FC-ID is 020000
Last clearing of "show interface" counters 2d11h27m
Statistics:
BBCR_FrameFailures 0 TotalRxBytes 0
BBCR_RRDYFailures 0 TotalTxBytes 0
Class2FramesIn 0 LongFramesIn 0
Class2FramesOut 0 LossOfSync 0
Class3FramesIn 0 ShortFramesIn 0
Class3FramesOut 0 RxLinkResets 6
Class3Discard 0 TxLinkResets 19698
DecodeErrors 0 TotalLinkResets 19704
FReject 0 TotalRxFrames 0
FBusy 0 TotalTxFrames 0
AddressErrors 0 RxOfflineSeq 19698
LinkFailures 0 TxOfflineSeq 39409
--More--
Fibre Channel Interface
337