Users Guide

-- Power Supplies --
Unit Bay Status Type FanStatus FanSpeed(rpm) Power Usage (W)
-----------------------------------------------------------------------------
0 0 up UNKNOWN up 3536 0.0
0 1 up UNKNOWN up 3504 0.0
0 2 up UNKNOWN up 3440 0.0
0 3 up UNKNOWN up 3440 0.0
Total power: 0.0 W
-- Fan Status --
Unit Bay TrayStatus Fan0 Speed Fan1 Speed
------------------------------------------------------------------------------------
0 0 absent
0 1 absent
0 2 absent
0 3 absent
0 4 absent
Speed in RPM
Current BootSelector-Boot: Backup BIOS
Disabling FIPS Mode
When you disable FIPS mode, the following changes occur:
• The SSH server disables.
• All open SSH and Telnet sessions, as well as all SCP and FTP le transfers, close.
• Any existing host keys (both RSA and RSA1) are deleted from system memory and NVRAM storage.
• FIPS mode disables.
• The SSH server re-enables.
• The Telnet server re-enables (if it is present in the conguration).
• New 1024–bit RSA and RSA1 host key-pairs are created.
To disable FIPS mode, use the following command.
• To disable FIPS mode from a console port.
CONFIGURATION mode
no fips mode enable
The following Warning message displays:
WARNING: Disabling FIPS mode will close all SSH/Telnet connections, restart those
servers, and destroy
all configured host keys.
Proceed (y/n) ?
FIPS Cryptography
335