Users Guide

Displaying the Fabric Parameters
To display information on switch-wide and interface-specic fabric parameters, use the show commands in the following table.
Examples of these show commands follow this table.
Command Description
show cong Displays the fabric parameters.
show fcoe-map Displays the fcoe-map.
show fc fabric Displays the information on all switches in the fabric.
show fc lsdb Displays the link state database information.
show fc ns switch Display all the devices in name server database of the switch.
show fc ns switch
brief
Display all the devices in name server database of the switch - brief version.
show fc ns fabric Display all the devices in name server database of the fabric.
show fc ns fabric
brief
Display all the devices in name server database of the fabric - brief version.
show fc route Displays the route table.
show fc zoneset Displays the zoneset.
show fc zoneset
active
Displays the active zoneset.
show fc zoneset
merged
Displays the merged active zones.
show fc zone Displays the congured zone.
show fc alias Displays the congured alias.
show fc switch Displays the FC Switch mode and world wide name.
show fc topology Displays the topology information of the local switch.
Example of the show config Command
Dell(conf)#Dell(conf-fmap-default_full_fabric-fcfabric)#show config
domain-id 3
principal-priority 253
E-D-TOV 101
R-A-TOV 10001
R-T-TOV 101
default-zone-allow all
active-zoneset zs1
Dell(conf-fmap-default_full_fabric-fcfabric)#
Example of the show fcoe-map Command
Dell#show fcoe-map
Fabric Name default_full_fabric
Fabric Type full-fabric
Fabric Id 1002
Vlan Id 1002
Vlan priority 3
FC-MAP 0efc00
FKA-ADV-Period 8
Fcf Priority 128
Config-State ACTIVE
Oper-State UP
Fabric Services
309