Reference Guide

716 | Per-VLAN Spanning Tree Plus (PVST+)
www.dell.com | support.dell.com
Figure 38-1. Per-VLAN Spanning Tree
FTOS supports three other variations of Spanning Tree, as shown in Table 38-1.
Implementation Information
The FTOS implementation of PVST+ is based on IEEE Standard 802.1d.
The FTOS implementation of PVST+ uses IEEE 802.1s costs as the default costs (Table 38-2). Other
implementations use IEEE 802.1d costs as the default costs if you are using Dell Networking systems
in a multi-vendor network, verify that the costs are values you intended.
On the S5000, you can enable PVST+ on 254 VLANs. To set up VLANs, see Chapter 53, Virtual
LANs (VLAN).
Table 38-1. FTOS Supported Spanning Tree Protocols
Dell Networking Term IEEE Specification
Spanning Tree Protocol (STP) 802.1d
Rapid Spanning Tree Protocol
(RSTP)
802.1w
Multiple Spanning Tree Protocol
(MSTP)
802.1s
Per-VLAN Spanning Tree Plus
(PVST+)
Third Party
R2
R3
R1
2/32
1/22
1/32
2/12
3/22
3/12
STI 3: VLAN 300
STI 1: VLAN 100
STI 2: VLAN 200STI 2: VLAN 200
Forwarding
XX
XX
XX
STI 1/2/3 root
Blocking