Reference Guide

NPIV Proxy Gateway | 641
Figure 32-4. show fcoe-map Command Examples
Table 32-4.
show fcoe-map Field Descriptions
Field Description
Fabric-Name Name of a SAN fabric.
Fabric ID The ID number of the SAN fabric to which FC traffic is forwarded.
VLAN ID The dedicated VLAN used to transport FCoE storage traffic between servers
and a fabric over the NPG. The configured VLAN ID must be the same as the
fabric ID.
VLAN priority FCoE traffic uses VLAN priority 3. (This setting is not user-configurable.)
FC-MAP FCoE MAC-address prefix value - The unique 24-bit MAC address prefix that
identifies a fabric.
FKA-ADV-period Time interval (in seconds) used to transmit FIP keepalive advertisements.
FCF Priority The priority used by a server to select an upstream FCoE forwarder.
Config-State Indicates whether the configured FCoE and FC parameters in the FCoE map
are valid: Active (all mandatory FCoE and FC parameters are correctly
configured) or Incomplete (either the FC-MAP value, fabric ID, or VLAN ID
are not correctly configured).
Oper-State Operational status of link to the fabric: up (link is up and transmitting FC
traffic), down (link is down and not transmitting FC traffic), link-wait (link is
up and waiting for FLOGI to complete on peer FC port), or removed (port has
been shut down).
Members S5000 Ethernet and FC ports that are members of the dedicated FCoE VLAN
that carries storage traffic to the specified fabric.
FTOS# show fcoe-map brief
Fabric-Name Fabric-Id Vlan-Id FC-MAP FCF-Priority Config-State Oper-State
fid_1003 1003 1003 0efc03 128 ACTIVE UP
fid_1004 1004 1004 0efc04 128 ACTIVE DOWN
FTOS# show fcoe-map fid_1003
Fabric Name fid_1003
Fabric Id 1003
Vlan Id 1003
Vlan priority 3
FC-MAP 0efc03
FKA-ADV-Period 8
Fcf Priority 128
Config-State ACTIVE
Oper-State UP
Members
Fc 0/0
Te 0/14 Te 0/16