Reference Guide

NPIV Proxy Gateway | 639
Displaying NPIV Proxy Gateway Information
To display information on NPG operation, use the show commands in Table 32-2.
Table 32-2. Displaying NPIV Proxy Gateway Information
Command Description
show interfaces status (Figure 32-3) Displays the operational status of Ethernet and Fibre Channel interfaces on
an S5000 NPG.
show fcoe-map [brief | map-name]
(Figure 32-4)
Displays the Fibre Channel and FCoE configuration parameters in FCoE
maps. Enter the brief keyword to display an overview of currently
configured FCoE maps.
Enter the name of an FCoE map to display the FC and FCoE parameters
configured in the map to be applied on S5000 Ethernet (FCoE) and FC
ports.
show qos dcb-map map-name (Figure 32-5) Displays configuration parameters in a specified DCB map.
show npiv devices [brief] (Figure 32-6 and
Figure 32-7)
Displays information on FCoE and FC devices currently logged in to the
NPG.
show fc switch (Figure 32-8) Displays the FC mode of operation and worldwide node (WWN) name of
an S5000 switch.
show vlan (Figure 32-9) Displays the VLANs currently configured on the switch, including the
VLANs dedicated to carrying only FC/FCoE traffic from a server to a SAN
fabric.