Reference Guide

60 | Getting Started
www.dell.com | support.dell.com
Figure 3-9. Tracking Changes with Configuration Comments
File System Management
The S5000 switch can use the internal Flash, USB Flash, or remote devices to store files. The system stores
files on the internal Flash by default, but you can configure it to store files elsewhere.
To view file system information:
The output of the
show file-systems command (Figure 3-10) shows the total capacity, amount of free
memory, file structure, media type, and read/write privileges for each storage device in use.
Task Command Syntax Command Mode
View information about each file system.
show file-systems
EXEC Privilege
FTOS#show running-config
Current Configuration ...
! Version 9-0(1-0)
! Last configuration change at Mon Jun 10 21:20:04 2030 by admin
!
boot system stack-unit 0 primary system: B:
boot system stack-unit 0 secondary tftp://10.200.200.241/kp-diablo
boot system stack-unit 0 default tftp://10.11.200.241/kp-diablo
!
redundancy auto-synchronize full
!
service timestamps log datetime
!
hostname FTOS
!
enable password 7 b125455cf679b208e79b910e85789edf
!
username admin password 7 1d28e9f33f99cf5c
!
stack-unit 0 provision S5000
!
interface fibrechannel 0/0
shutdown
!
interface fibrechannel 0/1
shutdown
!
...
-- More --