Reference Guide

Interfaces | 451
Figure 21-34. show fc switch Command Example
RxOfflineSequences Number of offline sequences received.
TxOfflineSequences Number of offline sequences transmitted.
TotalOfflineSequences Total number of offline sequences.
Rate Information:
Input bytes/sec, frames/sec,
% of line-rate
Incoming rate of FC traffic in bytes per second, frames per second, and
percentage of the total line rate.
Output bytes/sec, frames/sec,
% of line-rate
Outgoing rate of FC traffic in bytes per second, frames per second, and
percentage of the total line rate.
Time since last interface status
change
Elapsed time since the operational status of the interface last changed.
Table 21-6.
show fc switch Command Description
Field Description
Switch Mode Operational mode of an S5000 switch. Default: NPIV (configured as an NPIV
proxy gateway).
Switch WWN Factory-assigned worldwide node (WWN) name of the S5000. The S5000
WWN name is not user-configurable.
Table 21-5.
show interfaces fibrechannel Command Description
Field Description
FTOS# show fc switch
Switch Mode : NPIV
Switch WWN : 10:00:5c:f9:dd:ef:10:c0
FTOS#