Reference Guide

408 | Internet Group Management Protocol (IGMP)
www.dell.com | support.dell.com
Adjust the Last Member Query Interval using the command ip igmp snooping last-member-query-interval
from INTERFACE VLAN mode.
Fast Convergence after MSTP Topology Changes
When a port transitions to the Forwarding state as a result of an STP or MSTP topology change, FTOS
sends a general query out of all ports except the multicast router ports. The host sends a response to the
general query and the forwarding database is updated without having to wait for the query interval to
expire.
When an IGMP snooping switch is not acting as a Querier it sends out the general query, in response to the
MSTP triggered link-layer topology change, with the source IP address of 0.0.0.0 to avoid triggering
Querier election.
Designating a Multicast Router Interface
You can designate an interface as a multicast router interface with the command ip igmp snooping mrouter
interface. FTOS also has the capability of listening in on the incoming IGMP General Queries and
designate those interfaces as the multicast router interface when the frames have a non-zero IP source
address. All IGMP control packets and IP multicast data traffic originating from receivers is forwarded to
multicast router interfaces.