Reference Guide

252 | Border Gateway Protocol IPv4 (BGPv4)
www.dell.com | support.dell.com
Figure 9-37. Sample Configuration Illustration
Example: Enable BGP, Router 1
FTOS# conf
FTOS(conf)#int loop 0
FTOS(conf-if-lo-0)#ip address 192.168.128.1/24
FTOS(conf-if-lo-0)#no shutdown
FTOS(conf-if-lo-0)#show config
!
interface Loopback 0
ip address 192.168.128.1/24
no shutdown
FTOS(conf-if-lo-0)#int tengig 1/21
FTOS(conf-if-te-1/21)#ip address 10.0.1.21/24
FTOS(conf-if-te-1/21)#no shutdown
FTOS(conf-if-te-1/21)#show config
!
interface TenGigabitEthernet 1/21
ip address 10.0.1.21/24
no shutdown
FTOS(conf-if-te-1/21)#int tengig 1/31
FTOS(conf-if-te-1/31)#ip address 10.0.3.31/24
FTOS(conf-if-te-1/31)#no shutdown
FTOS(conf-if-te-1/31)#show config
!
interface TenGigabitEthernet 1/31
ip address 10.0.3.31/24
no shutdown
FTOS(conf-if-te-1/31)#router bgp 99
GigE 1/31
10.0.3.31 /24
Loopback 1
192.168.128.1 /24
GigE 2/31
10.0.2.2 /24
Loopback 1
192.168.128.2 /24
Physical Links
Virtual Links
GigE 1/21
10.0.1.21 /24
ck 1
/24
GigE 2/11
10.0.1.22 /24
Lo
19
GigE 3/11
10.0.3.33 /24
Loopback 1
192.168.128.3 /24
GigE 3/21
10.0.2.3 /24
AS 99
AS 100
Peer Group BBB
Peer Group AAA
Peer Group CCC