Users Guide

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 8.3.19.0 Introduced on the S4820T.

Version 8.4.2.1 Introduced on the C-Series and S4810.

Version 8.2.1.0 Introduced on the E-Series ExaScale.

Version 7.4.1.0 Introduced on the E-Series TeraScale.

Usage Information If you apply a route map to a BGP peer or neighbor with the neighbor default-originate command

congured, the software does not apply the set lters in the route map to that BGP peer or neighbor.

neighbor description

Assign a character string describing the neighbor or group of neighbors (peer group).

Syntax

neighbor {ipv6-address | peer-group-name} description text

To delete a description, use the no neighbor {ipv6-address | peer-group-name}

description text command.

Parameters

ipv6-address Enter the IPv6 address in the x:x:x:x::x format.

NOTE: The :: notation species successive hexadecimal elds of zeros.

peer-group-name Enter the name of the peer group.

text Enter a continuous text string up to 80 characters.

Defaults Not congured.

Command Modes ROUTER BGP