Users Guide

Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
Usage Information
Entering a no debug ip bgp command removes all congured debug commands for BGP.
default-metric
Allows you to change the metrics of redistributed routes to locally originated routes. Use this command with the redistribute
command.
Syntax
default-metric number
To return to the default setting, use the no default-metric command.
Parameters
number Enter a number as the metric to be assigned to routes from other protocols. The
range is from 1 to 4294967295.
Defaults 0
Command Modes ROUTER BGP
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
Usage Information
The default-metric command in BGP sets the value of the BGP MULTI_EXIT_DISC (MED) attribute
for redistributed routes only.
Related Commands
bgp always-compare-med – enables comparison of all BGP MED attributes.
redistribute – redistributes routes from other routing protocols into BGP.
IPv6 Border Gateway Protocol (IPv6 BGP)
987