Users Guide

To disable debugging, use the no debug ip bgp [ip-address | peer-group peer-group-
name] keepalives [in | out] command.
Parameters
ipv6-address (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format followed by the prex
length in the /x format. The range is /0 to /128.
NOTE: The :: notation species successive hexadecimal elds of zeros.
peer-group peer-
group-name
(OPTIONAL) Enter the keywords peer-group followed by the name of the peer
group.
in (OPTIONAL) Enter the keyword in to view only inbound keepalive messages.
out (OPTIONAL) Enter the keyword out to view only outbound keepalive messages.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
Usage Information
Entering a no debug ip bgp command removes all congured debug commands for BGP.
debug ip bgp notications
Allows you to view information about BGP notications received from neighbors.
Syntax
debug ip bgp [ipv6-address | peer-group peer-group-name] notifications [in
| out]
To disable debugging, use the no debug ip bgp [ip-address | peer-group peer-group-
name] notifications [in | out] command.
Parameters
ipv6-address (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format then the prex length
in the /x format. The range is from /0 to /128.
NOTE: The :: notation species successive hexadecimal elds of zeros.
peer-group peer-
group-name
(OPTIONAL) Enter the keywords peer-group then the name of the peer group.
IPv6 Border Gateway Protocol (IPv6 BGP)
985