Users Guide

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 8.3.19.0 Introduced on the S4820T.

Version 8.4.2.1 Introduced on the C-Series and S4810.

Version 8.2.1.0 Introduced on the E-Series ExaScale.

Version 7.4.1.0 Introduced on the E-Series TeraScale.

Usage Information

The autonomous systems congured in this command are visible to the EBGP neighbors. Each autonomous

system is fully meshed and contains a few connections to other autonomous systems. The next hop, MED,

and local preference information is preserved throughout the confederation.

The system accepts confederation EBGP peers without a LOCAL_PREF attribute. The software sends

AS_CONFED_SET and accepts AS_CONFED_SET and AS_CONF_SEQ.

bgp confederation peers

Specify the autonomous systems (ASs) that belong to the BGP confederation.

Syntax

bgp confederation peers as-number [...as-number]

To remove bgp confederation peers, use the no bgp confederation peer command.

Parameters

as-number Enter the AS number. The range is 1 to 65535.

...as-number (OPTIONAL) Enter up to 16 confederation numbers. The range is from 1 to 65535.

Defaults Not congured.

Command Modes ROUTER BGP