Users Guide

match ipv6 address
Congure a lter to match routes based on IPv6 addresses specied in an access list.
C-Series, E-Series, S-Series
Syntax
match ipv6 address prefix-list-name
To delete a match, use the no match ipv6 address prefix-list-name command.
Parameters
prex-list-name Enter the name of IPv6 prex list, up to 140 characters.
Defaults Not congured.
Command Modes ROUTE-MAP
Command History
Version 8.4.2.1 Introduced on the S-Series.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Introduced on the C-Series. Increased the name string to accept up to 140
characters. Prior to version 7.8.1.0, the names are up to 16 characters long.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
Related Commands
match ipv6 next-hop – redistributes routes that match the next-hop IP address.
match ipv6 route-source – redistributes routes that match routes advertised by other routers.
match ipv6 next-hop
Congure a lter which matches based on the next-hop IPv6 addresses specied in the IPv6 prex list.
C-Series, E-Series, S-Series
Syntax
match ipv6 next-hop prefix-list prefix-list-name
To delete a match, use the no match ipv6 next-hop prefix-list prefix-list-name
command.
Parameters
prex-list prex-list-
name
Enter the keywords prefix-list followed by the name of congured prex list,
up to 140 characters.
Defaults Not congured.
Command Modes ROUTE-MAP
Command History
Version 8.4.2.1 Introduced on the S-Series.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Introduced on the C-Series. Increased the name string to accept up to 140
characters. Prior to version 7.8.1.0, the names are up to 16 characters long.
926
IPv6 Access Control Lists (IPv6 ACLs)