Users Guide

• For a Port Channel interface, enter the keywords port-channel followed by
a number. For the C-Series and S-Series, the range is 1 to 128. For the E-Series,
the range is 1 to 255 for TeraScale and 1 to 512 for ExaScale.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
•
For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed
by the slot/port information.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0.2.0 Introduced on the S6000.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.4.2.1 Introduced on the S-Series.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Introduced on the C-Series. Increased the name string to accept up to 140
characters. Prior to version 7.8.1.0, names are up to 16 characters long.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
Usage Information
Field Description
“Ingress IPv6...” Displays the name of the IPv6 ACL, in this Example “AclList1”.
“seq 10...” Displays the lter. If the keywords count or byte were congured in the lter, the
number of packets or bytes processed by the lter is displayed at the end of the
line.
Example
Dell#show ipv6 accounting access-list
!
Ingress IPv6 access list AclList1 on GigabitEthernet 9/0
Total cam count 15
seq 10 permit icmp host 3333:: any mobile-advertisement log
seq 15 deny tcp any any rst
seq 20 permit udp any any gt 101 count (0 packets)
!
Dell#
show running-cong acl
Display the ACL running conguration.
C-Series, E-Series, S-Series
Syntax
show running-config acl
Command Modes
• EXEC
• EXEC Privilege
IPv6 Access Control Lists (IPv6 ACLs)
923