Users Guide
• 25 = SMTP
• 169 = SNMP
destination address Enter the IPv6 address of the network or host to which the packets are sent in the
x:x:x:x::x format followed by the prex length in the /x format. The range is /0 to /
128. The :: notation species successive hexadecimal elds of zero.
message-type (OPTIONAL) Enter an ICMP message type, either with the type (and code, if
necessary) numbers or with the name of the message type . The range is 0 to 255
for ICMP type and 0 to 255 for ICMP code.
count (OPTIONAL) Enter the keyword count to count packets processed by the lter.
byte (OPTIONAL) Enter the keyword byte to count bytes processed by the lter.
Defaults Not congured.
Command Modes ACCESS-LIST
Command History
Version 9.0.2.0 Introduced on the S6000.
Version 8.4.2.1 Introduced on the E-Series TeraScale and S-Series.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Introduced on the C-Series.
Version 7.4.1.0 Added the monitor option.
Related Commands
deny – congures a lter to drop packets.
permit – congures a lter to forward packets.
show cam-acl
Show space allocated for IPv6 ACLs.
Syntax
show cam-acl
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
IPv6 Access Control Lists (IPv6 ACLs)
919