Users Guide

Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Introduced on the C-Series.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
Usage Information When all sequence numbers have been exhausted, this feature permits re-assigning new sequence number
to entries of an existing access-list.
Related Commands resequence prex-list ipv6 – resequences a prex list.
resequence prex-list ipv6
Re-assign sequence numbers to entries of an existing prex list.
C-Series, E-Series, S-Series
Syntax
resequence prefix-list ipv6 {prefix-list-name StartingSeqNum Step-to-
increment}
Parameters
prex-list-name Enter the name of congured prex list, up to 140 characters. Increased the name
string to accept up to 140 characters. Prior to version 7.8.1.0, the names are up to
16 characters long.
StartingSeqNum Enter the starting sequence number to resequence. The range is 0 to 65535.
Step-to-Increment Enter the step to increment the sequence number. The range is 1 to 65535.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0.2.0 Introduced on the S6000.
Version 8.4.2.0 Introduced on the S-Series.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Introduced on the C-Series.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
Usage Information When all sequence numbers have been exhausted, this feature permits re-assigning new sequence number
to entries of an existing access-list.
Related Commands resequence access-list – resequences an access-list.
IPv6 Access Control Lists (IPv6 ACLs)
917