Users Guide

Command History
Version 9.0.2.0 Introduced on the S6000.
Version 8.4.2.1 Introduced on the S-Series.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Introduced on the C-Series.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
Usage Information As shown in the Example below, the same sequence number is used for the remark and an ACL rule. The
remark precedes the rule in the running-conguration because it is assumed that the remark is for that rule
or that group of rules that follow the remark. You can congure up to 4294967290 remarks in a given ACL.
Example
Dell(config-ipv6-acl)#remark 10 Remark for Entry # 10
Dell(config-ipv6-acl)#show config
!
ipv6 access-list Acl1
description IPV6 Access-list
seq 5 permit ipv6 1111::2222/127 host 3333::1111 log count bytes
remark 10 Remark for Entry # 10
seq 10 permit icmp host 3333:: any mobile-advertisement log
seq 15 deny tcp any any rst
seq 20 permit udp any any gt 100 count
Dell(config-ipv6-acl)#
Related Commands show cong – displays the current ACL conguration.
resequence access-list
Re-assign sequence numbers to entries of an existing access-list.
C-Series, E-Series, S-Series
Syntax
resequence access-list {ipv4 | ipv6 | mac} {access-list-name StartingSeqNum
Step-to-Increment}
Parameters
ipv4 | ipv6 | mac Enter the keyword ipv4, ipv6 or mac to identify the access list type to
resequence.
access-list-name Enter the name of a congured IP access list, up to 140 characters. Increased name
string to accept up to 140 characters. Prior to version 7.8.1.0, names are up to 16
characters long.
StartingSeqNum Enter the starting sequence number to resequence. The range is 0 to 4294967290.
Step-to-Increment Enter the step to increment the sequence number. The range is 1 to 4294967290.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0.2.0 Introduced on the S6000.
Version 8.4.2.0 Introduced on the S-Series.
916
IPv6 Access Control Lists (IPv6 ACLs)