Users Guide

Description
Static Entries Lists the total number of congured or static ARP entries.
Dynamic Entries Lists the total number of learned or dynamic ARP entries.
CPU Lists which CPU the entries are stored on.
Example (Summary)
Dell# show arp summary
TotalEntries Static Entries Dynamic Entries CPU
---------------------------------------------
83 0 83 CP
Dell#
Related Commands
• ip local-proxy-arp — enable/disable Layer 3 communication in secondary VLANs.
• switchport mode private-vlan — set PVLAN mode of the selected port.
show arp retries
Display the congured number of ARP retries.
Syntax
show arp retries
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.1.0 Introduced.
Related Commands
arp retries — sets the number of ARP retries in case the system does not receive an ARP reply in response
to an ARP request.
IPv4 Routing
875