Users Guide

• 4 records all messages generated for FC operation on the switch.
Default: 4.
Defaults Trace level 4: All FC error messages on the switch are recorded in the FC dump le.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage Information
Use this command to specify the level of trace information to be included in the FC trace log. To display the
trace log, enter the show file fcmfs:/TRACE_LOG_FC/qstack_trace.log command.
Example
Dell#change fc-trace-level 2
Related Commands
show fc-trace-level— displays the currently congured FC trace level.
clear counters brechannel
Clear Fibre Channel statistics for an FC port.
S5000
Syntax
clear counters fibrechannel slot/port
Parameters
slot/port For slot, enter the stack-unit number assigned to the switch. The range of slot
(stack-unit) numbers is 0 to 11. The range of port numbers is 0 to 47.
Defaults None
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage Information
Use the clear counters fibrechannel command to clear the statistics (counters) displayed in
show interfaces fibrechannel command output for a specied FC port.
Example
Dell(conf)#clear counters fibrechannel 0/11
Clear counters on Fc 0/11 [confirm] yes
Related Commands
interface brechannel — congures a Fibre Channel interface on the switch.
show interfaces brechannel — displays the conguration of a Fibre Channel interface.
Fabric Services Commands
803