Users Guide

• 1000MB
• 100MB
• 10MB
Example
Dell#show interfaces tengigabitethernet 1/0 phy
Mode Control:
SpeedSelection: 10b
AutoNeg: ON
Loopback: False
PowerDown: False
Isolate: False
DuplexMode: Full
Mode Status:
AutoNegComplete: False
RemoteFault: False
LinkStatus: False
JabberDetect: False
AutoNegotation Advertise:
100MegFullDplx: True
100MegHalfDplx: True
10MegFullDplx: False
10MegHalfDplx: True
Asym Pause: False
Sym Pause: False
AutoNegotiation Remote Partner's Ability:
100MegFullDplx: False
100MegHalfDplx: False
10MegFullDplx: False
10MegHalfDplx: False
Asym Pause: False
Sym Pause: False
AutoNegotiation Expansion:
ParallelDetectionFault: False
...
Related Commands
show interfaces — displays information on a specic physical interface or virtual interface.
show interfaces description
Display the descriptions congured on the interface.
Syntax
show interfaces [interface] description
Parameters
interface (Optional) Enter one of the following keywords and slot/port or number
information:
• For a Fast Ethernet interface, enter the keyword FastEthernet followed by
the slot/port information.
• For Loopback interfaces, enter the keyword loopback followed by a number
from 0 to 16383.
• For the management interface on the RPM, enter the keyword
ManagementEthernet followed by the slot/port information. The slot range
is 0-1 and the port range is 0.
• For the Null interface, enter the keywords null 0.
• For a Port Channel interface, enter the keywords port-channel followed by
a number. For the C-Series and S-Series, the range is 1 to 128. For the E-Series,
the range is 1 to 255 for TeraScale and 1 to 512 for ExaScale.
760
Interfaces