Users Guide

Version Description
7.7.1.0 Introduced on the C-Series.
7.6.1.0 Introduced IPv6 MGBP on the E-Series.
Usage Information
The following describes the sho ip bgp ipv4 multicast summary command shown in the
Example below.
Field Description
BGP router
identier
Displays the local router ID and the AS number.
BGP table version Displays the BGP table version and the main routing table version.
network entries Displays the number of network entries, route paths, and the amount of memory
used to process those entries.
BGP path attribute
entries
Displays the number of BGP path attributes and the amount of memory used to
process them.
BGP AS-PATH
entries
Displays the number of BGP AS_PATH attributes processed and the amount of
memory used to process them.
BGP community
entries
Displays the number of BGP COMMUNITY attributes processed and the amount of
memory used to process them. The show ip bgp community command
provides more details on the COMMUNITY attributes.
Dampening enabled Displayed only when you enable dampening. Displays the number of paths
designated as history, dampened, or penalized.
Neighbor Displays the BGP neighbor address.
AS Displays the AS number of the neighbor.
MsgRcvd Displays the number of BGP messages that neighbor received.
MsgSent Displays the number of BGP messages that neighbor sent.
TblVer Displays the version of the BGP table that was sent to that neighbor.
InQ Displays the number of messages from that neighbor waiting to be processed.
OutQ Displays the number of messages waiting to be sent to that neighbor. If a number
appears in parentheses, the number represents the number of messages waiting to
be sent to the peer group.
Up/Down
Displays the amount of time (in hours:minutes:seconds) that the neighbor is in the
Established stage. If the neighbor has never moved into the Established stage, the
word never is displayed.
State/Pfxrcd
If the neighbor is in Established stage, the number of network prexes received.
If a maximum limit was congured with the neighbor maximum-prefix
command, (prfxd) appears in this column.
If the neighbor is not in Established stage, the current stage is displayed (Idle,
Connect, Active, OpenSent, OpenConrm). When the peer is transitioning
between states and clearing the routes received, the phrase (Purging) may appear
in this column.
Border Gateway Protocol
513